Vitara Suspension Lift Kit

CALMINI 3" SUPER ARTICULATION SYSTEM &  6" COMBO SYSTEM
Maximum Sidekick/Tracker Off-Road Suspension Performance!


CALMINI does it right! We offer a system that truly improves every aspect of the vehicles off-road ability. Our system, using replacement control arms that create lift and ground clearance is the only way to go. Our exclusive longer control arms increase wheel travel, and maintain proper track width and wheel alignment. You can't do either with just a longer spring or weak coil spring spacer. Also, it's fully bolt-on. This is a full performance suspension system, not just a lift kit. Kit features our ultra high-strength tubular replacement control arms and 4 heavy-duty coil springs for maximum off road performance and chassis ground clearance. Heavy duty drop link arms included to position front axle housing  properly. Our complete kit includes: CALMINI tubular control arms, 4 new lifted coil springs, front axle drop brackets, strut spacers, extended rear trailing arms, rear V-Bar with adjustable heim joint for extreme rear flex, CALMINI performance shocks, struts, polyurethane bushings, hardware, and complete instructions.   This is the supreme off-road kit for your Sidekick or Tracker.  Accept nothing but the best for your rig!

CALMINI 3" BODY LIFT


We're normally not big proponents of body lifts, But on this vehicle it's mandatory for achieving  the most lift as possible. Getting the body rocker panels below the door up away from  the ground is important for saving the body as well as tire  clearance. Our 3" body lift includes custom front bumper brackets, blocks, and mounting hardware. It can be used in combination with our 2" or 3" suspension systems for maximum tire clearance when using up to 32" tall tires. This a complete kit and includes detailed installation instructions. Kit does include transfer case shift lever extension. Minor welding required for shift lever extension and on some models, the steering shaft will also need to be modified.

CALMINI 2" SUSPENSION SYSTEM

This kit is tough as nails and just as stout as the 3" suspension system! Designed to give 2" of lift, PLUS 2" of additional ground clearance over stock.  This kit also includes our trademark heavy duty control arms that are built tough!  Full kit includes our heavy duty  tubular control arms, front struts, CALMINI rear shocks, rear coil springs, rear bump stop extensions, polyurethane pivot bushings and spring cup seats, complete hardware, and detailed instructions.  This kit is without a doubt, absolutely the best value for the money in a lift for this model.  It provides amazing flex off-road and a smooth controlled ride on the street.  Bump stops are no longer included with the system as shown in the picture.

Grand Vitara /XL-7
CALMINI 2.5" SUSPENSION SYSTEM


CALMINI does it right every time! We offer a system that truly improves every aspect of the vehicles off-road ability. Our system, using replacement control arms that create lift and ground clearance, is the only way to go. Our exclusive longer control arms increase wheel travel, and maintain proper track width and wheel alignment. You can't do either with just a longer spring. Also, it's fully bolt-on. This is a suspension system, not just a lift kit. Kit features our ultra-high strength tubular replacement control arms and 4 heavy duty coil springs for maximum off road performance and chassis ground clearance. Heavy duty drop link arms included to position front axle housing  properly. Kit also includes: new ball joints, heavy duty tie rod extensions w/ tie rod ends, rear track bar bracket, replacement front struts, rear shocks w/boots, strut spacers, complete hardware, and polyurethane bushings at all contact points. Kit comes complete with installation instructions and is entirely bolt-on! Finished in signature CALMINI blue powdercoating.

CALMINI REPLACEMENT TOPS


This top replaces the worn factory original soft top. Meets or exceeds original top quality on all points. Using factory hardware to install it exactly! High quality cotton vinyl is designed to last.  Bikini tops also available.  Bikini tops are designed to protect you from the elements while still allowing an "open air" feeling.

CALMINI INTERIOR SPORT BAR KIT

*shown less support gussets and mounting plates.  Included in the full kit.


The CALMINI interior sport cage is constructed of 1 3/4" x .120" wall tubing. Designed to maximize safety on or off-road.   Bars can be used to mount all type of off-road accessories and safety devices. Full cage assembly shown above.  The kit comes un-assembled, but does include full foot plates, gussets, and hardware. Welding and fitting required. 

CALMINI PERFORMANCE 8V HEADER KIT*


Far and away, the absolute best quality header made for the Sidekick / Tracker. We use a THICK 3/8" head flange that eliminates warping and leaks. It's also port matched to work on the Suzuki's rectangular exhaust port. Other headers use a round port. What does that match? Unlike other painted or chrome plated headers, our header is the only one offered with a lifetime warranty and comes with a hi-temp ceramic coating throughout.  The CALMINI header add horsepower and increases fuel economy. Installation of this kit is fast and easy with complete hardware and detailed instructions included. A great performance value for your dollar. Complete kit includes header, upper flange gasket, collector kit, lower flange gasket, hardware and installation instructions.  Minor welding is required to connect the collector into the factory exhaust system.

CALMINI PERFORMANCE 16V HEADER KIT*

THE ORIGINAL SHORTY HEADER!


Far and away, the absolute best quality header made for the 16v Sidekick and Tracker. We use a THICK 3/8" head flange that eliminates warping and leaks. It's also port matched to work on the Suzuki's circular exhaust port. Other headers use a round port. What does that match? Unlike other painted or chrome plated headers, our header is the only one offered with a lifetime warranty and comes with a hi-temp ceramic coating throughout.  The CALMINI header add horsepower and increases fuel economy. Installation of this kit is fast and easy with complete hardware and detailed instructions included. A great performance value for your dollar. Complete kit includes header, upper flange gasket, spacers,  lower flange gasket, hardware and installation instructions.  Direct bolt-on replacement for factory header!

CALMINI MID RANGE CAMSHAFT*


The CALMINI camshaft improves horsepower and torque from 2200 - 5500 rpm. Improved torque helps quicken acceleration. Smooth idle makes for improved on and off--road drivability. Maximum horsepower is obtained with the addition of the CALMINI header and increased air and fuel flow through improved carburetion.  A must have for the Samurai that is off-roaded.  Kit comes complete with new camshaft and timing and set-up instructions. This camshaft is for 8 valve motors only!

CALMINI REPLACEMENT PERFORMANCE PANEL FILTERS


Our new hi-flow element flows 50% more air then stock paper element plus it's washable! Can be reused over and over again.  Built as a drop in replacement in the factory air box.  Let your Sidekick/Tracker breathe again with this CALMINI filter.

CENTERFORCE DUAL FRICTION CLUTCH KIT


This ultra heavy duty unit delivers 90% more clamping power than stock while maintaining stock pedal feel. Clutch disc face features metallic compound that delivers better wear and heat management characteristics than stock factory. This unit can handle the stresses off larger tires, towing, or just running with a modified engine especially in off-road situation.  The throwout and pilot bearing are available separately.

CALMINI ANVIL FRONT AXLE HOUSING


No more cracked or broken stock aluminum axle housings with this unit. The “Anvil” is a CALMINI exclusive, and is completely fabricated from scratch as a replacement housing designed to handle any kind of off-road abuse. Uses the steel third member housings from a Vitara/Grand Vitara. We’ve even built in additional strength by including a replacement passenger (short) side axle that rides on an outside bearing built into the housing. The slick part is that it now uses a drivers (left) side outer axle on both sides! You now only have to carry one spare! Kit comes complete with CALMINI built Anvil housing, billet machined stub axle, seals, bearing, c-clips, oil drain plugs, polyurethane bushings, complete hardware, and installation instructions.  If you’re into hard core off-road use of your Sidekick/Tracker and your rig has our 3" suspension system, you NEED this setup! 

LOCKRIGHT REAR LOCKERS


The Lock-Right is an automatic positive locking differential unit that is second to none when extreme traction is need in off-road situations.  Using the Lock-Right allows for lower approach speeds to obstacles which mean better driver control and reduced tire wear.  This kit install using the stock differential case and can be ordered with or without side gears, to replace worn out factory units, if you like.  Kit comes complete with all necessary parts and installation instructions.

SUPERWINCH MANUAL LOCKING HUBS


These are the perfect replacements for worn-out factory hubs. High quality steel cased hubs are precisely machined & assembled. The mechanism is fully sealed from water, dust, and sand making it virtually maintenance free. Features self lubricating cam design. Limited lifetime warranty. Recommend for any Sidekick or Tracker with a suspension lift to help relieve CV stress. These hubs are sold in pairs.

CALMINI HEAVY DUTY REPLACEMENT REAR AXLE SHAFTS

NEW !


Yet another CALMINI exclusive.  No longer do you have to worry about breaking rear axles while running large tires off-road!  Our completely new forged axles are 30% stronger than the stock.  Made from 4140 alloy steel, their redesigned input spline area greatly reduces the chance of them shearing or breaking.  If you are running oversize tires and a locker, these axles are a necessity. 

CALMINI LIMITED SLIP DIFFERENTIAL UNIT


This unit is the factory stuff!. This clutch type unit features precise torque loading and puts the power to the ground by eliminating the traction loss of a spinning drive wheel. This units design incorporates a progressive rate of slippage that delivers predictable on and off-road performance and reduced driveline component stress. Consider this instead of a locker if you drive mainly on ice or snowy road on-road conditions. Unit is available for the front and rear of all Sidekicks and Trackers and the front 10-bolt as well.

CALMINI 4.24:1 ROCKCRAWLER TRANSFER CASE GEARSET

100% MACHINED BILLET, NO WELDED GEARS HERE!


Finally, a true ROCKCRAWLER Transfer case gear set for for the Sidekick and Tracker.  Our gear set is manufactured in the USA from SAE 8620 alloy billet material. We believe that welded gears are JUNK! For long wear life and vibration free operation at high speeds nothing else is acceptable. Final reduction of 4.24:1 is a whopping 134% lower than stock! When used with the stock axle ratio of 5.12, it yields a crawl ratio of 79.3 :1!  If you look around, the only Sidekicks/Trackers you find really doing it off road, run a CALMINI ROCKCRAWLER! There's a reason!  It completely transforms this vehicle's off road capability. Complete kit comes with all new machined billet gears, bearings, seals, 2 quarts of oil and installation instructions for an easy do it yourself at home installation.

 

CALMINI STEERING STABILIZER & TRUSS KIT

Our all new 1-piece precision laser crafted design performs 2 needed functions. First, our steering stabilizer reduces front wheel shimmy and is needed for larger tires and lifted vehicles. Second, the Truss Bar prevents flex and strengthens the front suspension. This truss features tabs for mounting optional front skid plate sold separately.  Entire kit comes with steering stabilizer, truss, mount brackets, U-bolts, polyurethane bushings, complete hardware and installation instructions.  Our all bolt-on design requires no drilling to install. A great upgrade when installing a lift kit.


*Required part when ordering front skid plate

 



Copyright © 2008 -Yiannis Kalivitis
All Rights Reserved
Email:
kalivitis@cytanet.com.cy